w 20-4

The layer winding machine W 20-4 is an extremely stable, universally applicable machine for winding layer coils of different diameters and geometries.
It is designed for round and flat wire wrapping.
The special feature of this machine is that on the one hand, similar to the W 15-6, it can only produce single coils and, on the other hand, with the corresponding workpiece fixture, double coils with winding jumps. That is, in this case, the winding process is operated only with 2 wire guide due to the special winding.
Due to the physical and geometrical characteristics of the body to be wound, the machine is equipped with a mechanical counter bearing and with a wire guide set for simultaneous winding of up to 4 spools. Due to these characteristics, the machine is equipped with a reinforced linear axis and four wire guides.
It is important to note that all four bodies to be wound must have the same geometry and be wound with the same wire strength.
Programming is done via a PLC control. The control of the machine is carried out via a control panel and additional function keys located on the machine housing.
Thanks to the electronic speed control, the winding speed can be infinitely and thus optimally adapted to the working conditions.
All winding parameters are entered via a touch screen display operator guidance. The winding process is carried out automatically in processing of the stored and selected program (50 programs possible).