W 15 DF

The W 15 / DF 200E have been designed in combination for rewinding wires and filaments from large to small standard spools. The reel seat of the W 15 is pneumatically tensioned between the winding spindle and the counter bearing.The threads to be wound are guided over the wire guide unit with rollers on the spool mount. The reel seat of the W 15 is pneumatically tensioned between the winding spindle and the counter bearing. The thread laying is done by a servo linear drive unit.

The entire rewinding process takes place completely automatically in the processing of the stored and selected program (50 programs possible). Extensive accessories allow optimal adaptation of this robust universal machine to every winding task. To achieve a simplified and clearer operation of the programming, the control panel has been equipped with a touch screen display.

Download technical data

Please fill out the following table. Your relevant information enables us to prepare a precise offer for optimally suitable machines. We also recommend sending drawing documents and wrapped samples.

Formular

Winding-No.:		1	2	3
Purpose of the core (transformer etc.)
Special features (solder thread, intermediate insulation)
Type of wire (Cul, CrNi, etc.)
Wire diameter / wire cross-section
Body dimensions	L1
	L2
	A
	B
	a
	b
	da
Round coil
Square coil
Multiple winding
Number of windings
Required wire length
Number of layers
Layer switch-off	after each layer
Layer switch-off	after how many layers
Other details

First Name*

Last name*

Company*

Address

Phone

E-Mail*

I hereby confirm that I have read the privacy policy*

Fields marked with * are mandatory fields