M 1000

This system was developed for winding fine wire on long spools with cylindrical body geometries and narrow contours. The bobbin is fixed on one side using a three-jaw clamping system and then pushed into the spindle housing with the movable counter bearing. During the winding process, the counter bearing on the mounted linear guide is moved according to the set feed. The so-called wire compartment is fixed in the starting position and the winding process can then begin. The winding principle is based on a fixed wire guide and a movable or movable coil former.

Download technical data

Please fill out the following table. Your relevant information enables us to prepare a precise offer for optimally suitable machines. We also recommend sending drawing documents and wrapped samples.

Formular

Winding-No.:		1	2	3
Wire sizes
Wire material
Pitch (min., max.)
Different pitches on one strip?
Strip dimensions	Width b
	Length l
	Thickness h
Specialities (forms)

Wire diameter d
Inner diameter of the spiral D
Winding relation	D/d
Spiral length (spiral resistance)
Tolerance for spiral resistance
Tandem operation? (with 2 coils together)

First Name*

Last name*

Company*

Address

Phone

E-Mail*

I hereby confirm that I have read the privacy policy*

Fields marked with * are mandatory fields