WS 70-ATM8

The winding principle of the WS 70-ATM8 is based on a fixed wire guide and a movable or movable bobbin. The bobbin is fixed on one side using a three-jaw clamping system and then pushed into the spindle housing with the movable counter bearing. During the winding process, the counter bearing on the mounted linear guide is moved according to the set feed. The so-called wire compartment is fixed in the starting position and the winding process can then begin.

Download technical data

Please fill out the following table. Your relevant information enables us to prepare a precise offer for optimally suitable machines. We also recommend sending drawing documents and wrapped samples.

Formular

1.	Wire size
2.	Wire material (e.g. Cu)
2.	i.e. copper
3.	Dimensions of the winding coil:
	(or specification of DIN No.)
	Gesamt - ⌀
	Innen - ⌀
	Clear span
	Bohrung - ⌀
4.	Type of dereeler (e.g. rolling/overhead)
4.	i.e. rolling or overhead
5.	Dimensions of the dereeler spool
	(or specification of DIN No.)
	Gesamt - ⌀
	Innen - ⌀
	Clear span
	Bohrung - ⌀
6.	How many times should be wound?
7.	Should the machine have several spooling cycles?

First Name*

Last name*

Company*

Address

Phone

E-Mail*

I hereby confirm that I have read the privacy policy*

Fields marked with * are mandatory fields