Resistors

Following this text you will find a list of our machines with a short description and a winding pattern. If you are unsure which machine is right for you, simply fill out this questionnaire.

WWM 10

The WWM-10 is designed for the continuous winding of all types of carrier materials. Round and flat materials up to a cross-section of 10mm can be processed. All parameters are freely programmable and retrievable. Processes, winding devices and resistance value control are optionally available.
Expand informationInfos einklappen

Due to the modular design of the machine, customer-specific units such as bandaging device, cutting device, heating device, etc. are easy to integrate

M602-S

The entire working process of the M602-S wire winding system is completely automatic, processing the stored and selected program (100 programs possible). The direction of rotation of the winding material and the coil parameters are entered via a display operator prompt.
Expand informationInfos einklappen

The number of turns and wire feed are also programmed. Exactly identical spirals are produced using a start-up and run-down ramp. The wires to be wound are guided onto the mandrel via a wire guide unit. The machine stops automatically when the number of turns is reached. The mandrel is clamped using a 3-jaw chuck and supported by a sliding counter bearing on the right-hand side. Two pneumatic supports are used when producing very long spirals on a thin mandrel. The exact wire laying is carried out by a servo linear drive unit.

M600

The machine is equipped with electronic speed control. The winding speed can be optimally adapted to the working conditions within the speed ranges that can be preselected on pairs of stepped discs.
Expand informationInfos einklappen

A presettable counter for forward and backward counting in both working directions automatically switches the machine down to a slow speed shortly before the final number of turns or meter count if the meter counter is installed. This means that it stops exactly to the turn or cm when the set final number of turns or meters is reached. The setting of the laying feed is stepless and can be corrected during winding. The laying carriage can easily be guided by hand to any location by disengaging the laying feed. The counter bearing is easily adjustable.

M603

The machine is equipped with electronic speed control. The winding speed can be optimally adapted to the working conditions within the speed ranges that can be preselected on pairs of stepped discs.
Expand informationInfos einklappen

A presettable counter for forward and backward counting in both working directions automatically switches the machine down to a slow speed shortly before the final number of turns or meter count if the meter counter is installed. This means that it stops exactly to the turn or cm when the set final number of turns or meters is reached. The setting of the laying feed is stepless and can be corrected during winding. The laying carriage can easily be guided by hand to any location by disengaging the laying feed. The counter bearing is easily adjustable.

M606

The machine is equipped with electronic speed control. The winding speed can be optimally adapted to the working conditions within the speed ranges that can be preselected on pairs of stepped discs.
Expand informationInfos einklappen

A presettable counter for forward and backward counting in both working directions automatically switches the machine down to a slow speed shortly before the final number of turns or meter count if the meter counter is installed. This means that it stops exactly to the turn or cm when the set final number of turns or meters is reached. The setting of the laying feed is stepless and can be corrected during winding. The laying carriage can easily be guided by hand to any location by disengaging the laying feed. The counter bearing is easily adjustable.