M-1000 ATM

The winding principle of the M 1000 is based on a fixed wire guide and a movable or movable bobbin. The bobbin is fixed on one side using a three-jaw clamping system and then pushed into the spindle housing with the movable counter bearing. During the winding process, the counter bearing on the mounted linear guide is moved according to the set feed. The so-called wire compartment is fixed in the starting position and the winding process can then begin.

Download technical data

Please fill out the following table. Your relevant information enables us to prepare a precise offer for optimally suitable machines. We also recommend sending drawing documents and wrapped samples.

Formular

Winding-No.:		1	2	3
Purpose of the core (transformer etc.)
Special features (solder thread, intermediate insulation)
Type of wire (Cul, CrNi, etc.)
Wire diameter / wire cross-section
Body dimensions	L1
	L2
	A
	B
	a
	b
	da
Round coil
Square coil
Multiple winding
Number of windings
Required wire length
Number of layers
Layer switch-off	after each layer
Layer switch-off	after how many layers
Other details

First Name*

Last name*

Company*

Address

Phone

E-Mail*

I hereby confirm that I have read the privacy policy*

Fields marked with * are mandatory fields