Rewind
Following this text you will find a list of our machines with a short description and a winding pattern. If you are unsure which machine is right for you, simply fill out this questionnaire.
ELW ATM
All parameters are freely programmable and can be accessed again. Drains are optionally available.
UWM 20-ATM6
In order to achieve simplified and clearer programming operation, the control panel was equipped with a touchscreen display. All parameters are freely programmable and retrievable. Drains are optionally available.
UWM 20-ATM-S
The machine is equipped with multiple bobbin holders, i.e. h One to several coils can be wound simultaneously in one operation. In order to achieve simplified and clearer programming operation, the control panel was equipped with a touchscreen display. All parameters are freely programmable and retrievable. Drains are optionally available.
UWM 20
A wide range of accessories enables this robust universal machine to be optimally adapted to any winding task, including rewinding. In order to achieve simplified and clearer programming operation, the control panel was equipped with a touchscreen display.
UWM 25 / ATM 35
Other features of the machine:
– Wire length counter
– pneumatic wire clamp
– tangential wire discharge with max. wire withdrawal
force of 60 N and wire diameter 0.2 – 2.0 mm
M602-100
The machine winds at a preselected, consistent wire speed. Thanks to the programmable length measuring mechanism with start-up and run-down ramp, exactly identical coils are wound. The wires to be wound are guided onto the spool via a wire guide unit. At the same time, a wire length measurement is carried out. The machine stops automatically if the wire breaks or ends. The material to be wound is pneumatically tensioned between the winding spindle and the counter bearing. The exact wire laying is carried out by a servo linear drive unit. The additional bezel module is recommended for processing very long winding goods up to (1000 mm). The bezel is attached to the wire guide and can be positioned on the respective winding material by loosening the clamping levers. If the bezel is not in use, it can be swiveled upwards or removed completely. Therefore also suitable for wrapping ceramics, hard paper tubes, micanite and mica strips, etc. For example, heating strips and heating coils of all kinds can also be wrapped.
UWM25 – ATM25
UWM 25-S
Feed and speed are set using a potentiometer. The values can also be regulated during the winding process. The high speed that can be achieved and the ease of operation make the UWM a viable additional machine for filling wire magazines. Parts at risk of corrosion are surface treated. All drives have sufficient reserves to achieve the longest possible service life, even under extreme operating conditions.
UWM 30-ATM12
With the UWM30 wire winding machine, up to 16 wires – especially steel wires – can be wound onto braided coils with high strength and dimensions according to customer specifications. The UWMATM combination is particularly recommended as a complete system. With our multiple drain ATM 12/16 you can also wind from 1 to 16 drain spools at high wire speed. The insert coils are precisely folded (doubled) in this process. The process is equipped with a low-maintenance, wear-free braking system. The entire rewinding process of the wire winding system is carried out completely automatically by processing the saved and selected program (99 programs possible). Parts at risk of corrosion are treated galvanically. All drives have enough reserves to achieve the highest possible service life even under difficult operating conditions.
UWM 350-ATM1-550
The entire rewinding process takes place completely automatically, processing the saved and selected program (50 programs possible). The ATM1-550 drain is a wire drain rack for large wire spools. A constant wire withdrawal force is achieved via a spring-loaded dancer system and an electronically controlled braking system. Hysteresis brakes are used as control brakes. The dancer position is recorded optoelectronically (optical sensor, distance measurement) and transferred to the brake control system and a corresponding braking current is generated. The controlled braking system enables high rewinding speeds with sufficient winding quality. The entire wire drain is surrounded by a safety cage. Changing only occurs when the cage is properly closed! In order to achieve simplified and clearer programming operation, the control panel was equipped with a touchscreen display.
UWM 800
The constant tape tension is realized by a hysterese brake at the fleece guide.The end of the tape is controlled by an optic sensor.The regular brake system gives a high speed in winding and an even quality.The dereeler AS 1200 has an support for dereeling for big coils.The whole winding unit is optional equipped with a security fence with light barrier on one side.Its considerable appliances make it possible to match every winding operation. The Device is also suitable for rewinding.The operator works outside of the winding area.All parts of our machines are corrosion resistant. All drives have enough power for a long working life.
UWM 40-ATM-S
In order to achieve simplified and clearer programming operation, the control panel was equipped with a touchscreen display.
WS 70-ATM8
The so-called wire compartment is fixed in the starting position and the winding process can then begin.
M-1000 ATM
During the winding process, the counter bearing on the mounted linear guide is moved according to the set feed. The so-called wire compartment is fixed in the starting position and the winding process can then begin.