REW 250-400

Rectangular core winding machine type REW 250/400 with interchangeable winding heads and wire guides of various types and sizes for all rectangular core winding tasks up to approx. 2.8 mm wire diameter or flat copper and resistance material with the corresponding bending moment.

The maximum winding width is equal to the inner width of the rectangular core minus 1 mm. It can therefore be wound to within 0.5 mm of the leg of the core. It is also possible to wrap all four sides.

Thanks to the electronic speed control, the winding speed can be optimally adjusted to the working conditions. A presettable counter switches off the machine when the preselected number of turns is reached. The setting of the laying feed is stepless and can be corrected during the run. The feed direction can be switched using an illuminated button, and the set direction is then displayed at the same time.

Download technical data

Please fill out the following table. Your relevant information enables us to prepare a precise offer for optimally suitable machines. We also recommend sending drawing documents and wrapped samples.

Formular

Winding-No.:		1	2	3
Purpose of the coil (transformer etc.)
Special features (solder thread, intermediate insulation)
Type of wire (Cul, CrNi, etc.)
Wire diameter
Core dimensions wound	da
	di
	h
Core dimensions unwound	da
	di
	h
Unwrapped residual segment	α
Number of windings
Required wire length
Number of layers
Other details

First Name*

Last name*

Company*

Address

Phone

E-Mail*

I hereby confirm that I have read the privacy policy*

Fields marked with * are mandatory fields