BD-LP 4000
The BD-LP 4000 is a special-design taping machine for producing the protective or basic bandage for needle coils, also possible for trapezoidal coil winding. Needle coil lengths of up to 4m can be taped.
The BD-LP is equipped with a magazine taping head that is positioned on a hanging device with linear guidance. The tape feed is stepless. By using four axes driven by servo motors, all horizontal coil geometries (straight lines, corners and curves) can be moved in the large working area. According to the previously programmed coil contour, the taping process runs in a fully automatic cycle, controlled by the PLC.
The tape tension is set to the tape material used and the required insulation quality.
The tape head is transported through the needle coil using guide elements. The protective or basic bandage of the needle coil is produced automatically through the linear transport and rotation of the taping head.
Integrated tape head supports prevent the bandaging vibrations that occur during the insulation process and thus enable an exact winding pattern.
The control panel is equipped with a touchscreen display to simplify and clearly operate the programming.
To ensure compliance with general safety regulations, the winding system can optionally be supplied with a safety fence, light barriers or light scanners.
The system can be used for both series production and repair operations.
Please fill out the following table. Your relevant information enables us to prepare a precise offer for optimally suitable machines. We also recommend sending drawing documents and wrapped samples.
