W 20-8
The layer winding machine W 20 is an extremely stable, universally applicable machine for winding layer spools of different diameters. It can be wound on a winding shaft up to 8 coils simultaneously.
Due to the physical and geometric characteristics of the complete body to be wound, the machine is equipped with a mechanical counter bearing and with a wire guide set for simultaneous winding of up to 8 coils. Due to these characteristics, the machine is equipped with a reinforced linear axis.
It is important to note that all eight bodies to be detected must have the same geometry and be wound with the same wire.
The drive of the installation is coupled with the winding spindle and takes place via a servomotor.
The wires are fed by 4 mechanically braked double wire outlets AS 600-DUO.
Programming is done via a PLC control. The control of the machine is carried out via a control panel and additional function keys located on the machine housing.
Thanks to the electronic speed control, the speed can be infinitely and optimally adapted to the working conditions.
All winding parameters (winding speed, direction of rotation of the spindle, installation feed, wire length and reel parameters (teach-in procedure) are entered via a touch screen display user interface.) The rewinding process is carried out automatically in the respective stored and selected program (50 programs possible).
Please fill out the following table. Your relevant information enables us to prepare a precise offer for optimally suitable machines. We also recommend sending drawing documents and wrapped samples.
